category：Building materials / date：2023-06-06 07:55:01 / browse：122 / comment：4
The main control load of the platform has high requirements for the shear bearing capacity of the guide leg of the offshore platform. In order to study the factors affecting the shear capacity of the jacket legs of the stainless steel pipe in pipe concrete-filled steel tubular offshore platform, a total of concrete-filled steel tubular shear members were fabricated to study the effects of outer steel pipe material, concrete strength, void ratio and shear span ratio on the shear capacity of concrete-filled steel tubular in pipe. It is found that the shear strength of members increases with the decrease of void ratio and the increase of concrete strength; The larger the shear span ratio, the smaller the shear strength. Combined with the test, the empirical formula of shear capacity of concrete-filled steel tubular in pipe is proposed, which is analyzed and verified by ABAQUS finite element modeling software. The results show that the simulation is in good agreement with the test results. In order to study the axial compression performance of stainless steel tube concrete conduit leg and the axial compression performance of stainless steel concrete conduit leg, experiments are used to verify the correctness of the finite element model. The load displacement curves of specimens in groups were compared, and the effects of different void ratio, concrete strength, diameter thickness ratio and bone index on the axial compression performance of concrete-filled stainless steel tubular short columns under axial compression were analyzed. The results show that with the increase of concrete strength, the bearing capacity of specimens increases, but the ductility of specimens decreases; With the increase of void ratio and diameter thickness ratio, the bearing capacity of the specimen decreases; The bearing capacity of stainless steel tube concrete can be effectively improved by adding steel bone; Increasing the bone matching index of steel bone can improve the bearing capacity of the specimen. Based on the jacket offshore platform, so as to improve the ice resistance and disaster prevention ability of the offshore platform. The scale test on the offshore platform shows that the composite offshore platform of concrete filled steel tubular in stainless steel pipe (hereinafter referred to as the composite offshore platform) has better anti icing performance than the ordinary jacket offshore platform. Taking push as an example, the peak acceleration and displacement of the upper deck of the composite offshore platform of concrete filled steel tubular in stainless steel pipe are reduced by % and % respectively. The analysis of ABAQUS finite element and experimental simulation results shows that the error of the two results can be basically within %. Through the simulation analysis of the ultimate bearing capacity of the stainless steel tube in tube concrete-filled steel tubular composite platform and the original offshore platform, it can be seen that the stainless steel tube in tube concrete-filled steel tubular composite platform has stronger ultimate bearing capacity. Therefore, the composite offshore platform of concrete-filled steel tube in stainless steel tube is a good new type of jacket offshore platform. Axial compression tests were carried out on austenitic and duplex stainless steel tube concrete short columns. The ultimate load, longitudinal strain and circumferential strain of the short columns under axial compression were measured. The effects of steel tube wall thickness and concrete strength on the bearing performance of the short columns were investigated. Reference was made to the European Code for design of concrete filled steel tubes (Eurocode), American code (ACI -) and Japanese code (aij-cft), China's relevant regulations D --dlt- and CECS calculate the preparation of stainless steel pipe construction prepare construction scheme and construction schedule scheme, and establish quality standards.Rheological and thermal changes in the quenching process of decorative stainless steel pipe the cooling characteristics of submerged quenching of stainless steel plate are numerically simulated by using the Euler multi fluid model in AVL fire software, the quenching medium is water. The mass, momentum and energy equations of gas-liquid two-phase of quenching medium and the quenching heat conduction equation of stainless steel workpiece are solved by numerical simulation. Based on the principle of equal heat flux between quenching medium and workpiece, the temperature field of quenching medium and workpiece is solved by coupling. The comparison between the numerical simulation and experimental results of decorative stainless steel pipe shows that the numerical simulation results of workpiece temperature are in good agreement with the experimental data. The model can reliably simulate the quenching process of workpiece, and can be extended to the multiphase flow simulation in complex system to guide the actual production. The single pass thermal simulation compression experiment of Cr super martensitic stainless steel was carried out by Gleeble thermal simulation tester to study the thermal deformation behavior at ~ ℃ and strain rate of . ~ s-, and the microstructure evolution law of grains under different conditions was analyzed; Based on Sellars hyperbolic sinusoidal model, the flow stress constitutive equation of Cr super martensitic stainless steel was constructed. The results show that the peak stress decreases with the increase of deformation temperature and the decrease of strain rate; With the increase of deformation temperature, the grain grows and coarsens gradually. With the increase of strain rate, the dynamic recrystallized grains are obviously refined. The thermal deformation activation energy Q = . JMOL of decorative stainless steel pipe is calculated, and the expression of Zener Hollomon parameter is obtained. Different feedstocks were prepared by mixing crmnmon nickel free austenitic stainless steel powder prepared by aerosol and wax based binder. The effects of binder ratio and powder loading on the rheological properties of feed were studied by rh high pressure capillary rheometer. Non Newtonian index n, % ethylene vinyl acetate copolymer (EVA) and % stearic acid (SA). The powder loading was vol%. The feed had good comprehensive rheological properties. In order to study the cementitious properties of stainless steel AOD slag % high density polyethylene (HDPE), stainless steel AOD slag was used to replace some cement, and its effects on the working properties and mechanical properties of cement mortar were studied. The results show that using stainless steel AOD slag to replace cement from ~ %, with the increase of the content of stainless steel AOD slag, the water consumption of standard consistency of cement first decreases and then increases. When the content is %, the water reduction effect of stainless steel AOD slag is good; With the increase of the content of stainless steel AOD slag, the strength of cement mortar decreases in turn, indicating that the cementitious activity of stainless steel AOD slag is small.Martinique SPHESPHE—& mdash; Hot rolled steel plate and strip for deep drawing.The corrosion resistance of stainless steel depends on chromium,Martinique304 stainless steel plate is well planted, but because chromium is an integral part of steel, the protection is different.Bodden-Town, the following methods are often used to prevent intergranular corrosion: reduce the amount of carbon in steel so that the amount of carbon in steel is lower than the saturated solubility of austenite in equilibrium, that is, fundamentally solve the problem of precipitation of chromium carbide (crc) on the grain boundary. Generally, the requirement of intergranular corrosion resistance can be met when the amount of carbon in steel is reduced to less than .%.Accounting for about % - % of the total steel, it is widely used in the national economy. Because the steel pipe has a hollow section, it is suitable for gas and solid transmission pipelines; at the same time, compared with the round steel of the same weight, the steel pipe has large section coefficient and high flexural and torsional strength, so it has also become an important material in various machinery and building structures. Stainless steel is used Under the condition of equal weight, the structure and components formed by pipe have a larger section modulus than solid parts. Therefore, stainless steel pipe itself is an economic section steel that saves metal. It is an important part of steel, especially in oil drilling, production and metallurgyStainless steel grade group Series & mdash; Chromium nickel manganese austenitic stainless steel series & mdash; Chromium nickel austenitic stainless steel model & mdash; Good ductility, used for molding products. It can also be machined to harden rapidly. Good weldability. The wear resistance and fatigue strength are better than those of stainless steel.
Low temperature embrittlement of stainless steel pipe --- in low temperature environment, the phenomenon of reduced elongation and area shrinkage is called low temperature embrittlement. It is mostly produced on the body centered cubic structure of ferrite series.As we all know, stainless steel pipe has a strong ability of atmospheric oxidation and is not easy to rust under normal circumstances, & ldquo; Stainless steel pipe & rdquo; Hence the name of. But what I want to tell you today is that stainless steel pipes will also rust. I believe many friends will be surprised! I believe there are many people who don't know how to explain to customers! Next let's popularize science!At low temperature, ferritic stainless steel pipe has low-temperature brittleness like carbon steel but austenitic steel does not. Therefore, while austenitic stainless steel or nickel base alloy does not show low-temperature brittleness. Sus (Cr) and SUS (cr) of ferritic stainless steel pipe It shows that the impact value decreases sharply at low temperature. Therefore ferritic or martensitic stainless steel produces low-temperature brittleness,MartiniquePrice of stainless steel plate in 2015, it is necessary to pay special attention when using at low temperature. As a way to improve the impact toughness of ferritic series stainless steel, high purification process can be considered. With the help of C and N level, the embrittlement temperature is in the range of - ℃ to - ℃OK or not?,CE--“ Code for design of cold formed stainless steel structural parts & rdquo; And & ldquo; jointly published by nidi and euro inox; Structural stainless steel design manual & rdquo; The design of structural parts for buildings with long service life and good integrity has been simplified.For business people, of course, it is better to spend less under feasible conditions. For goods such as stainless steel pipes, we can often see that there will be packaging film bags on them. Although they are not heavy, if there are a large number of single purchases, they will also produce certain economic expenses, but why do many people clearly dislike this thing on stainless steel pipes, But I have to accept it. Next, xincoral Xiaobian will tell you why stainless steel pipes need packaging bags.Stainless steel seamless steel pipe for fluid transportation (instead of gbt- instead of gbt- instead of gb-)
There are mechanical, chemical and electrochemical methods to remove the scale of stainless steel pipe. Due to the complexity of the composition of the scale of stainless steel pipe, the removal of the scale of stainless steel pipe should be carried out in two steps, the first step is pretreatment and the second step is ash removal.Promotion,Since the back is not filled with argon, its advantages are obvious, mainly for its simplicity and low cost which is suitable for installation on the construction site. However, due to its structural characteristics, flux cored welding wire has high requirements for welders during operation, with fast wire feeding speed and high wire feeding accuracy. It is difficult to master. Welders should be specially trained and skilled before they can participate in welding in Yangba, Nanjing And foreign construction sites, we have successfully solved the problem that argon cannot be passed through the junction and repair port.: stainless steel plate: it can be divided into cold-rolled plate and hot-rolled plate. Its surface has bright surface, fog surface and matte surface. It is commonly known as stainless steel plate, including B plate and Ba plate. In addition, it can also be plated with other light colors according to customer requirements. The main specifications of plates are: m * m, m * m, m * m, m * M, m * m. If customer demand is large, we can cut them according to customer size. In addition, we can replace wire drawing plate, anti sliding plate and electroplating plate Series & mdash; Heat resistant chromium alloy steel.Martinique,When hoisting stainless steel pipes, public slings, such as hoisting belt and public collet number, shall be used. It is strictly prohibited to use steel wire rope to avoid scratching the surface; and when hoisting and placing, it shall prevent scratching caused by impact and collision. If there are surface scratches, electric arc traces and surface purification in the process of transportation, storage and processing, it must be completely cleaned, polished with an angle grinder,MartiniqueStainless steel mesh belt factory, and then polished Polishing with optical sheet or metallographic sandpaper.CE--“ Code for design of cold formed stainless steel structural parts & rdquo; And & ldquo; jointly published by nidi and euro inox; Structural stainless steel design manual & rdquo; The design of structural parts for buildings with long service life and good integrity has been simplified.Rheological and thermal changes in the quenching process of decorative stainless steel pipe the cooling characteristics of submerged quenching of stainless steel plate are numerically simulated by using the Euler multi fluid model in AVL fire software, and the numerical results are compared with the experimental results. In the research, the quenching medium is water. The mass, momentum and energy equations of gas-liquid two-phase of quenching medium and the quenching heat conduction equation of stainless steel workpiece are solved by numerical simulation. Based on the principle of equal heat flux between quenching medium and workpiece, the temperature field of quenching medium and workpiece is solved by coupling. The comparison between the numerical simulation and experimental results of decorative stainless steel pipe shows that the numerical simulation results of workpiece temperature are in good agreement with the experimental data. The model can reliably simulate the quenching process of workpiece, and can be extended to the multiphase flow simulation in complex system to guide the actual production. The single pass thermal simulation compression experiment of Cr super martensitic stainless steel was carried out by Gleeble thermal simulation tester to study the thermal deformation behavior at ~ ℃ and strain rate of . ~ s-, and the microstructure evolution law of grains under different conditions was analyzed; Based on Sellars hyperbolic sinusoidal model, the flow stress constitutive equation of Cr super martensitic stainless steel was constructed. The results show that the peak stress decreases with the increase of deformation temperature and the decrease of strain rate; With the increase of deformation temperature, the grain grows and coarsens gradually. With the increase of strain rate, the dynamic recrystallized grains are obviously refined. The thermal deformation activation energy Q = . JMOL of decorative stainless steel pipe is calculated, and the expression of Zener Hollomon parameter is obtained. Different feedstocks were prepared by mixing crmnmon nickel free austenitic stainless steel powder prepared by aerosol and wax based binder. The effects of binder ratio and powder loading on the rheological properties of feed were studied by rh high pressure capillary rheometer. Non Newtonian index n, viscous flow activation energy E and comprehensive rheological factor alpha are calculated by second order model regression analysis; STV. The results show that the prepared feeds are pseudoplastic fluid. The binder system was composed of % microcrystalline wax (MW), % high density polyethylene (HDPE), % ethylene vinyl acetate copolymer (EVA) and % stearic acid (SA). The powder loading was vol%. The feed had good comprehensive rheological properties. In order to study the cementitious properties of stainless steel AOD slag, stainless steel AOD slag was used to replace some cement, and its effects on the working properties and mechanical properties of cement mortar were studied. The results show that using stainless steel AOD slag to replace cement from ~ %, with the increase of the content of stainless steel AOD slag, the water consumption of standard consistency of cement first decreases and then increases. When the content is %, the water reduction effect of stainless steel AOD slag is good; With the increase of the content of stainless steel AOD slag, indicating that the cementitious activity of stainless steel AOD slag is small.
share 4 Comments
Comment / Cancel reply