Bad VoslauWhich is better, solid wood floor or laminate floorConcentrated competition in the industry / xinxi_21408

category：Building materials / date：2024-04-25 01:17:04 / browse：52 / comment：6

Precautions for solid wood floor installation : prevent keel from drying. Test: for the ground lacquer cloth with thin thickness, you can tear it by hand. If it can be easily torn off, the tear strength of such ground lacquer cloth can not meet the requirements. After gently rolling up and pressing down, if it can not be restored to the original state and leave an indentation, such a product has poor softness.If the layers can be torn by hand, it indicates that the product layers are not well combined, and stratification will soon occur in future use.Plastic floor paint cloth has the advantages of light weight, elasticity, good mechanical strength, comfortable foot feeling, wear resistance, pollution resistance, corrosion resistance, heat insulation, sound insulation, moisture resistance, small water absorption, good insulation, self extinguishing, easy cleaning, simple construction, convenient maintenance and low price. In a large number of civil buildings and public places, it has high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor paint cloth belongs to soft floor. It is a floor coil produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor paint cloth is m ~ m, the width is mm ~ mm ~ mm, and the total thickness is mm (machine room) ~ mm (plant and public buildings)For long-term indoor use, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion, and are not easy to layer and curl, especially foamed leather, you can choose low-grade products, with poor flexibility but many of these products are processed with waste materials, generally thin thickness and large shrinkage coefficient. When checking the appearance quality of rubber plastic floor paint cloth, it should be under scattered sunlight or fluorescent lamp, and the illumination should be ( ± LX, LM from the tested sample, conduct oblique visual inspection. First, observe whether there are cracks, fractures and delaminations on the surface of the local lacquer cloth. If there are, it can be judged that the local lacquer cloth is unqualified. The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. Those that cannot be observed are excellent products and first-class products; those that are slight but not obvious are recognized as qualified. Go back to the third step for observationIf there is any missing pattern on the surface of the ground lacquer cloth, or if there is any defect of the transparent wear-resistant film on the surface, it is the first-class product and the first-class product. If there is a slight missing print or lack of film, it is the qualified product, otherwise it is the unqualified product. Finally, carefully check whether there is deviation in the multi-color overprint on the surface, whether there is color difference in different parts, if the top-class product is uneven, if there are the above two defects, but if there is no obvious, it is the first-class productProducts that obviously have the above defects but do not affect the overall beauty are judged as qualified products. Finally,Bad VoslauWaterproof board and drainage board, the appearance quality of ground lacquer cloth is determined based on the above judgment. When selecting ground lacquer cloth, and the smell of inferior products is stronger; secondly, calculate the use area and the same room should be selectedCoiled materials with the same batch number, pattern and thickness. When purchasing, carefully observe the appearance quality, open a roll of ground lacquer cloth, separate the ends for a few meters, observe the surface layer of the sample, the surface layer is thick, the wear-resistant layer is thick, and the service time is long, and then observe whether there are cracks, fractures, wrinkles, bubbles and large defects; whether the cross section is layered and cracked; whether the pattern is open, lack of film and overprint deviationDefects such as color difference color difference and pollution.Bad Voslau, Remove the pavement and remove dust to avoid the accumulation of crushed stones or friction coefficient floating dust on the floor surface.The shoe sole can be placed at the door to prevent broken stones or friction coefficient dust from being brought into the room.Generally, when cleaning the floor you can wipe the road surface with cotton strips.Do not wipe the floor with wet mop or corrosive liquid (such as soap liquid and vehicle gasoline). In order to better improve the indoor air quality humidity, humidification equipment can be selected in autumn and winter to maintain the indoor air quality humidity at % - %.When moving furniture, you can&#;t push and pull the door on the ground immediately. You should stretch out and remove it with care.The bottom of furniture that moves frequently should be pasted with an eraser. Skin allergy.Kibre Mengist,Wear resistance: generally, it is about ~ times that of coated wood floor. SPC floor is considered as a new generation of floor materials which is characterized by extremely stable, high performance, complete waterproof, high-density sales core and pressure mark;It can be easily installed on different types of ground bases, concrete, ceramics or existing floors. After the floor has just been laid, always keep the indoor air circulating.

In terms of color matching, light color furniture can be freely composed with thick and light color floors. It is proposed to match warm color floors to look warm and tidy;However, the matching of dark furniture and dark floor should be particularly careful to prevent the depression of 'black autumn wind'.Although there are millions of wood species, there are not many suitable wood for flooring.According to GB / t national standard for solid wood flooring, the national standard for solid wood flooring in China is coniferous wood with air dry density not less than .g/cm and broad-leaved wood with air dry density not less than .g/cm The main applicable wood species under this standard are oak (oak)(there are different opinions about oak. The store will say the same. On the Internet, some say oak, some say oak,Bad VoslauWhat are the types of wood flooring, but some say oak), birch, two winged bean, muscarine, round bean, teak, elm, ash (Fraxinus mandshurica) iron sapphire, etc. if it exceeds this range, it should be carefully considered, otherwise the quality is not good or the price is unbearable. Good wear resistance and stabilityWhere to sell API,Sixth, his specifications and dimensions are also related to his total price.In today&#;s building materials industry, and consumers are confused. They don&#;t know whether their pay is worth it. Therefore, they all want to know that there is a relatively transparent price.Advantages: it is warm for many days and cool in summer. Of course, the lines are comfortable on the feet and resist germs.

days later, maggots grow on the floor. This problem occurs because the floor contains a lot of impurities.Where can I find it?,Again, ask what kind of material is the veneer on the floor (because the prices of different materials vary greatly).Second, sticky man is thin.Third, it is flame retardant, but it can&#;t be burned.Bad Voslau,UV layer: the coating formed after UV oil is cured with curing agent, which can prevent the volatilization of chemicals in the plate by UV.[]Some customers want to take a lighter to light the SPC floor to see if it can burn. If it burns, it is not fire safety, and if it doesn&#;t burn, it is flame retardant.In fact, the national regulations on the flame retardant grade of PVC latch floor meet the B Standard, and the flame retardant raw materials are listed as class a fire safety according to the national standard, such as marble, wall tiles, and placed on the PVC latch floor for natural ignition. After the cotton wool is burned sprinkled with ethanol, accurately measure the diameter of the burned PVC latch floor impression. If it is less than mm, it is Class B flame retardant grade.Instead of watching it burn.What is the difference between solid wood flooring and solid wood composite flooring?