Hanshanautoclaved aerated concrete blockOperation mode and characteristics / blog20651

category：Metallurgy and Minerals / date：2024-04-15 00:43:48 / browse：51 / comment：5

　　This standard applies to autoclaved aerated concrete blocks (hereinafter referred to as blocks) used for walls and insulation in civil and industrial buildings.　　 Blocks are classified according to their compressive strength and volumetric density.Hanshan, high insulation efficiency good sound absorption, and the ability to　　Control standard for radioactive substances in building materials mixed with industrial waste - Determination of steady-state thermal resistance and related characteristics of insulation materials - Protective hot plate method for testing the performance of aerated concrete - General rules - Test methods for volumetric density, moisture content, and water absorption of aerated concrete - Mechanical properties of aerated concrete - Test methods for drying shrinkage of aerated concrete - Test methods for frost resistance of aerated concrete ( - Terminology of bricks and blocks Product classification Specifications: The specifications and dimensions of the blocks are shown in Table Patzicia　　Specification for autoclaved aerated concrete blocks Scope This standard specifies the product classification, technical requirements, test methods, inspection rules, product quality instructions, stacking, and transportation of autoclaved aerated concrete blocks.　　Specification for autoclaved aerated concrete blocks Scope This standard specifies the product classification, technical requirements, test methods, inspection rules, product quality instructions, and transportation of autoclaved aerated concrete blocks.　　 Block product marking: Mark in the order of product name (code ACB), strength level, specification size, product grade, and standard number.

　　There are six levels of volumetric density: B, B, B,Hanshanaerated block brick, B, B, and B　　Aerated blocks have been widely used in load-bearing or non load-bearing structures and pipeline insulation in industrial and civil buildings in China　　as the main raw materials, with an appropriate amount of aerating agent, regulator, mixing and processed through batching, pouring, static stopping, cutting, and high-pressure steam curing. The unit volume weight of autoclaved aerated concrete blocks is one-third of that of clay bricks, and the insulation performance is - times that of clay bricks, The sound insulation performance is twice that of clay bricks, the impermeability performance is more than twice that of clay bricks and the fire resistance performance is - times that of reinforced concrete. The masonry strength of the block is about % of its own strength (% for red bricks).Price,　　 Blocks are classified according to their compressive strength and volumetric density.　　There are seven strength levels: A, A, A, A, A, A, and A　　 Blocks are classified according to their compressive strength and volumetric density.

　　 Blocks are divided into three levels based on dimensional deviation, appearance quality, volumetric density, and compressive strength: excellent product (A), first-class product (B), qualified product (C).Quality improvement,　　Marking examples: strength level A,Hanshanautoclaved aerated concrete block, bulk density level B, superior　　The reason why six parts of ordinary concrete have excellent thermal insulation performance. Aeration block is a lightweight and porous material　　 Blocks are divided into three levels based on dimensional deviation, appearance quality, volumetric density, and compressive strength: excellent product (A), first-class product (B), qualified product (C).Hanshan,　　 The following standards contain provisions that constitute the provisions of this standard by reference in this standard. At the time of publication of this standard, all versions shown are valid. All standards will be revised,HanshanAerated block, and all parties using this standard should explore the possibility of using the latest versions of the following standards.　　Control standard for radioactive substances in building materials mixed with industrial waste - Determination of steady-state thermal resistance and related characteristics of insulation materials - Protective hot plate method for testing the performance of aerated concrete - General rules - Test methods for volumetric density, moisture content, and water absorption of aerated concrete - Mechanical properties of aerated concrete - Test methods for drying shrinkage of aerated concrete - Test methods for frost resistance of aerated concrete ( - Terminology of bricks and blocks Product classification Specifications: The specifications and dimensions of the blocks are shown in Table 　　 Blocks are classified according to their compressive strength and volumetric density.